NFOX GT03 electric tricycle dual hydraulic brake riding accessories GT07N brake handle caliper fixing device system accessories

This is the brake handle used in the left hand. The total length of the broken wire is about 300mm. The style of the broken wire connector is 2 pins. The principle of breaking the wire and power is a mechanical normally closed switch.

This is the brake handle used in the left hand. The total length of the broken wire is about 450mm. The style of the broken wire joint is 3 pins. The principle of breaking the wire and power is a mechanical normally closed switch.

This is the brake handle used in the left hand. The total length of the broken wire is about 1500mm. The style of the broken wire connector is SM2A. The principle of breaking the wire and power is a mechanical normally closed switch.

Product Name: Hydraulic Brake YouTube Tee

Brand: NFOX

Part Number: BBR106

Material: Aluminum alloy

Purpose: For bicycles, tricycles, other models, one brake handle controls 2 calipers, one-to-two conversion accessories

Weight: about 11g for a single item

Box gauge: on demand

Remarks: Because the seal is copper and very soft, it does not require a lot of force to install, just drive the wrench with two fingers and can't twist it!

NFOX exclusive design and development, reasonable structure, high quality, more than 1000 to accept customization, a small amount of direct purchase spot supply!

This is the relevant parameter, please refer to

When installing, you can load it at one time according to the ranking order in the picture above.45-Degree Y-shaped structure is suitable for bicycle one-to-two structure

This is the relevant parameter, please refer to

When installing, you can load it at one time according to the ranking order in the picture above. 90-Degree T-type structure is suitable for mountain wheeler one-to-two brakes

This is the relevant parameters of the accessories, please refer to

This is the drawing of our designer, please refer to it.

This is a real case of installation completion, please refer to it.

This is the brake handle used in the right hand. The total length of the broken wire is about 300mm. The style of the broken wire connector is 2 pins. The principle of breaking the wire and power is a mechanical normally closed switch.

This is the brake handle used in the right hand. The total length of the broken wire is about 450mm. The style of the broken wire connector is 3 pins. The principle of breaking the wire and power is a mechanical normally closed switch.

This is the brake handle used in the right hand. The total length of the broken wire is about 1500mm. The style of the broken wire connector is SM2A. The principle of breaking the wire and power is a mechanical normally closed switch.

This is a straight YouTube brake caliper installed on the left, the YouTube length is 2300mm, the diameter is 5mm, the installation hole distance is 74mm, and the caliper body is made of aluminum alloy.

This is a YouTube brake caliper installed on the left movable head side, the YouTube length is 2300mm, the diameter is 5mm, the installation hole distance is 74mm, and the caliper body is made of aluminum alloy.

This is a YouTube brake caliper installed on the right movable head side, the YouTube length is 2300mm, the diameter is 5mm, the installation hole distance is 74mm, and the caliper body is made of aluminum alloy.

If there are still different models, please take a photo of the molding to us, and we can give you a reference so that you can buy the brakes that suit you!

Install brake pin tool, pipe cutting tool, oil change exhaust tool, and original mineral brake oil set, please buy on demand!